Technology Outlet Premium 3D Printer Resin

by Technology Outlet
Save £8.66
£16.95
£9.95 (inc. VAT)
£8.29 (ex. VAT)

Introducing our Premium 3D Printer Resin exclusive to Technology Outlet

3D Printer Resin Instructions, Cure times and Precautions

 1.LCD printer

(1).LCD castable & elastic resin: Set bottom layer 60-80s and each layer exposure time 12-18s for layer thickness at 50 μm, . The exposure time should be adjusted according to the projection light power of the printer. For example: LCD printer with 1mW/cm2, 70S for the bottom plate, and 15S for each layer.

 

(2) .LCD jewelry mold resin, teeth model, gingival mask: Set bottom layer 40-60s and each layer exposure time 4-12s for layer thickness at 50 μm, . The exposure time should be adjusted according to the projection light power of the printer. For example: LCD printer with 1mW/cm2, 50S for the bottom plate, and 8S for each layer.

 

(3) .LCD flexible resin: Set bottom layer 40-60s and each layer exposure time 4-12s for layer thickness at 50 μm, . The exposure time should be adjusted according to the projection light power of the printer. For example: LCD printer with 1mW/cm2, 45S for the bottom plate, and 6S for each layer.

 

(4) . LCD tough resin and low odor series resin: Set bottom layer 40-60s and each layer exposure time 4-12s for layer thickness at 50 μm, . The exposure time should be adjusted according to the projection light power of the printer. For example: LCD printer with 1mW/cm2, 50S for the bottom plate, and 8S for each layer.

 

 

(5)  High tenacity resin: Set bottom layer 40-60s and each layer exposure time 4-12s for layer thickness at 50 μm, . The exposure time should be adjusted according to the projection light power of the printer. For example: LCD printer with 1mW/cm2, 40S for the bottom plate, and 5S for each layer.

 

 

(6) High transparent resin: Set bottom layer 40-60s and each layer exposure time 4-12s for layer thickness at 50 μm, . The exposure time should be adjusted according to the projection light power of the printer. For example: LCD printer with 3mW/cm2, 50S for the bottom plate, and 14S for each layer.

 

 

(7) Dental surgical guide resin: Set bottom layer 40-60s and each layer exposure time 4-12s for layer thickness at 50 μm, . The exposure time should be adjusted according to the projection light power of the printer. For example: LCD printer with 1mW/cm2, 60S for the bottom plate, and 11S for each layer.

 

  1. DLP printer

(1) . DLP dental series resin: Set bottom layer 10-15s and each layer exposure time 2-8s for layer thickness at 50 μm, . The exposure time should be adjusted according to the projection light power of the printer. For example: DLP printer with 20mW/cm2, 15S for the bottom plate, and 3.5S for each layer. 

 

(2) . DLP jewelry series resin: Set bottom layer 10-15s and each layer exposure time 2-8s for layer thickness at 50 μm, . The exposure time should be adjusted according to the projection light power of the printer. For example: DLP printer with 20mW/cm2, 15S for the bottom plate, and 3.5S for each layer.

 

(3) . DLP standard resin: Set bottom layer 10-15s and each layer exposure time 1-8s for layer thickness at 50 μm, . The exposure time should be adjusted according to the projection light power of the printer. For example: DLP printer with 20mW/cm2, 12S for the bottom plate, and 2.2S for each layer.

 

(4) .DLP high transparent resin: Set bottom layer 10-15s and each layer exposure time 1-8s for layer thickness at 50 μm, . The exposure time should be adjusted according to the projection light power of the printer. For example: DLP printer with 20mW/cm2, 12S for the bottom plate, and 2.2S for each layer.

 

 、 About Cleaning Process

1.Jewelry and dental castable resin jobs: Spray with Isopropanol, then blow resin away with cool wind, prepare two containers with Isopropanol (alcohol> 95%), and place the jobs into the first container and slightly shake it, then soak in the second container for about 1 minute (dental resin should not exceed 30 seconds), flush with water before dry it, do make it sure it ‘s 100% dried as residuary alcohol may cause white spot or crack on jobs. Do not use ultrasonic for cleaning. Dental resin jobs are recommended to be cleaned before take off from the platform to avoid deformation.

 

  1. In addition to the above method, the LCD tough resin jobs can be washed with an aqueous solution of dish-washing detergent, adding an appropriate amount of detergent into water, immersing the jobs there in, brush it gently with a soft brush, and then drying it with cold air.

 

  About Post-Curing

 

  1. The curing time is proportional to the volume of the workpiece and inversely proportional to the optical power of the curing chamber. Example: 150 watt LED curing box, jewelry jobs is recommended to be cured with soaking in water for 20-30 minutes.

 

  1. The post-cure time of dental casting resin, dental non-casting resin and jewelry mold resin shall not more than 5 minutes.

 

  1. Dental work-pieces should be protected from extrusion during post-curing to prevent deformation.

 

4.Tough resin do not require post cure.

 

  Various precautions regarding the resin:

 

  1. Storage environment: Store in cool and dry place, and avoid sunlight, recommended temperature at 25-30 degrees Celsius.

 

  1. Preparation before use: Shake the resin well and leave it for 30 minutes before use. Allow to stand for 30 minutes to eliminate air bubbles that generated during the shaking process.

 

  1. Environmental conditions during use: The ambient temperature is recommended to be controlled at 25-30 degrees Celsius, and during the printing should avoid daylight.

Creality suggest cure times 50,  9 layers on the LD001

we used base 70 ,12 layers worked great for us

Compatible with DLP, SLA and LCD 3D printers. Available in 250ml and 1L bottles.

Choose from multiple colours and types suitable for jewellery and dental casts.

 

UK mainland UPS next business day delivery FREE for orders over £60.00 or £8.95 if below £60.00

UK Hermes 2-3 day standard delivery £4.95

(For UK mainland customers only, if the order is placed before 2pm. Excludes weekends and the Channel Islands) 

 

USA DELIVERY COSTS

USA £49.95

 

EUROPEAN DELIVERY COSTS

Austria
£19.95
Belgium
£16.95
Croatia
£49.95
Czech Republic
£19.95
Denmark
£19.95
Estonia
£24.95
France
£17.95
Germany
£17.95
Greece
£24.95
Hungary
£24.95
Ireland
£17.95
Italy
£19.95
Latvia
£24.95
Lithuania
£19.95
Luxembourg
£17.95
Monaco
£17.95
The Netherlands
£17.95
Norway
£32.95
Poland
£19.95
Portugal
£24.95
Romania
£29.95
Slovakia
£24.95
Slovenia
£24.95
Spain
£21.95
Sweden
£19.95
Switzerland
£29.95


REST OF THE WORLD DELIVERY COSTS

For orders under £279 £49.99
For orders over £279 £99.95


Please note: Delivery charges may be subject to change

Returns

All returns must be authorised with an official RMA number prior to shipping. Unauthorised returns may not be accepted.

Buyer is responsible for all shipping charges and goods in transit insurance. No refunds on shipping are applicable. Technology Outlet cannot be held responsible for products that arrive back damaged due to products not being shipped back in original packaging. Items purchased within 30 days deemed faulty will be exchanged like for like. Any item that is faulty after 30 days is covered under the manufacturer warranty to be repaired or replaced at the manufacturer's discretion.

To be eligible for a full refund, your item must be unused and in the same condition that you received it. It must also be in the original packaging.

Any hardware bought in error and box is opened will be subject to a 20% restocking fee and accepted back at management discretion.

To complete your return, we require a receipt or proof of purchase and must be authorised with an RMA number

Any customer wishing to return unused new sealed goods for a refund after 30 days will be subject to a 20% restocking fee.

Refunds
Once your return is received within 7 days of purchase and inspected, we will send you an email to notify you that we have received your returned item. We will also notify you of the approval or rejection of your refund. If you are approved, then your refund will be processed, and a credit will automatically be applied to your credit card or original method of payment.

Customer Reviews

Based on 2 reviews Write a review
Sale

Unavailable

Sold Out