The new Powder Coated FlexPlate from PrimaCreator consists of three parts. The first one is the magnetic surface that you will attach to the printers bed. The second and third one is the high quality spring steel sheet that is covered with a sheet of the best PEI Ultem.
The Flexplate-Powder Coated PEI is the perfect surface to print on, it’s very durable and easy to manage. And best of all, thanks to the Flexible plate your prints will be very to remove. Just give it a small bend and the print will pop right off.
PrimaCreator FlexPlate-Powder Coated PEI is based on a ferrite core which is much more heat resistant than neodymium magnets. This FlexPlate can withstand temperatures up to 130°C without any problems, so you can even use it with ABS.
PEI Ultem (Polyetherimide) from PrimaCreator is a reusable, relatively maintenance free, build surface for both ABS (with a Heated bed) and PLA (hot or cold), other materials such as Metal, Wood, PETG, ABS+ and many others also works just fine. You don’t require any additional adhesives such as glue or tape. PEI is appealing due to its "no-surface-prep" conditions, which make it convenient to work with. Additionally, printing on PEI requires no support rafts as parts adhere directly to the surface with no issue.
How To Use.
Unpack your FlexPlate, attach the magnetic surface to your print bed and then attach the spring steel plate with the PEI attached to it onto the magnetic surface. Remove the protective film from the PEI and re-level your print bed. You are now ready to print away. Parts should come free from the surface with almost no issue at all. PLA does not require heat but turning the heated bed up to 45C helps. You don´t need any adhesives but if you are going to print something large or for a long time, we recommend using the PrimaFix adhesive stick, it will make your parts stick even better and release even easier when the print is done. After the print is done, just let the plate cool down, remove the plate and give it a gentle bend. You can then just “pop” the model off the plate.
Before each print, wipe your PEI surface down with 70-91% Isopropyl alcohol, to ensure that you wipe away any grease or other residues that may have accumulated on the surface. This will help increase your surface adhesion greatly.
Use acetone, isopropyl alcohol, methyl alcohol, or soap to clean your PEI after use.
If you are unsure about sizes, please get in touch.
||165 x 165mm
||Creality 3D Ender-2 Pro
||220 x 220mm
||Anet A8, Wanhao Duplicator 6, TronXY X2, Monoprice Select Plus
||235 x 235mm
||All Creality 3D Ender-3 and Ender-5 Series (Apart from Max/Plus variants)
||254 x 235mm
||Prusa MK3, Raise3D N1
||255 x 245mm
||Creality 3D CR-6 SE
||290 x 290mm
||Creality 3D Ender-6
||305 x 235mm
||Creality 3D CR-10 Mini, Creality 3D CR-5 Pro, Creality 3D CR-5 Pro H
||310 x 310mm
||Creality 3D CR-10, Creality 3D CR-10S 300, Artillery SWX1, SWX2, Anet ET5
||310 x 320mm
||Creality 3D Ender-3 Max, Creality 3D, CR-10S Pro Series, Creality 3D CR-10 Smart (and Pro)
||330 x 330mm
||Geeetech A30, TronXY X3S, TronXY X5SA & Pro
||332 x 340mm
||Raise3D Pro 2 Series
||355 x 355mm
||Voron 350 V2
||377 x 370mm
||Creality Ender-5 Plus
||410 x 410mm
||Creality CR-10S 400, Formbot T-Rex, Formbot Raptor
||430 x 420mm
||Creality 3D CR-6 Max
||470 x 470mm
||Creaity 3D CR-10 Max
||510 x 510mm
||Creality 3D CR-10S 500