Flexion - Dual Extruder Retrofit Kit (Sku003)


Price:
£279 (inc. VAT) £232.50 (ex. VAT)

 

Developed by the inventor of Ninjaflex

Flexible filament extruder retrofit kit for both left and right sides of a dual-extruder printer. Print fast with flexible materials, higher resolution, and fewer failures. Also prints ABS and PLA better than your stock extruder.

 *Does not include stepper motor

Fits all of the most common dual extruder printers - Flashforge Creator Pro, Powerspec Ultra, Monoprice Dual, QiDi Tech, Malyan M180, Wanhao Duplicator 4s, etc.

Please note, the QiDi and CTC stock extruders are NOT compatible, so you will not be able to mix your stock and Flexion extruder. Also for QiDi, the temperature sensor location is moved and will read 10-15° low, so turn your print temperatures down.

The Flexion Extruder uses a high-stiffness lever to compress the filament. The compression is controlled with a cam and an adjust screw, rather than the traditional spring. This allows more tension and more precise control of the tension.

This kit requires you to disassemble your printer’s extruder and reinstall this upgrade. Detailed instructions on this process can be found on the Flexion support page

Quick Setup / Operation:

Step 1: Before initially loading filament, loosen the set screw that contacts the cam surface of the dial.  Set the dial to position 1.  Tighten the set screw until the drive roller makes contact with the idler roller.  Do not heavily torque the set screw, just tighten it using the shank of the allen wrench.

Step 2: Rotate the dial to position 4. (Confirm that the dial rotates between 1 and 4 without binding.  If it binds, loosen the set screw a small amount.)  At this point, you’re ready to load a filament and print.  Use position 1 for very soft materials (Like Jellyfish or Ninjaflex), position 2 for moderately soft materials (like SemiFlex), position 3 for moderately hard materials (like ABS), and position 4 for very hard materials (like filled PLA).  Set the correct dial location before loading filament.

Step 3: Load filament. With the dial at the correct setting and the extruder at the correct temperature, run your printer’s normal filament load cycle while you gently push the filament into the entrance liner.

Step 4: Prepare to print.  Do your normal print setup routine (build platform prep, acetone clean, application of bonding agent, preheat, etc).  Everyone has their own depending on their printer and the seriousness of their OCD.    (See our printing tips section for some useful tricks and methods).

UK mainland DPD next business day delivery FREE for orders over £60.00 or £8.99 if below £60.00

UK DPD 2-3 day standard delivery £4.95

(For UK mainland customers only, if the order is placed before 2pm. Excludes weekends and the Channel Islands) 

 EUROPEAN DELIVERY COSTS

Austria £12.00
Belgium £8.00
Bosnia £24.00
Bulgaria £24.00
Croatia £18.00
Czech Republic £14.00
Denmark £12.00
Estonia £18.00
Finland £18.00
France £10.50
Germany £8.00
Greece £24.00
Hungary £18.00
Iceland £24.00
Italy £14.00
Latvia £24.00
Lithuania £24.00
Luxembourg £9.00
Netherlands £8.00
Norway £24.00
Poland £18.00
Portugal £18.00
Romania £24.00
Serbia £24.00
Slovakia £14.00
Slovenia £18.00
Spain £14.00
Sweden £18.00
Switzerland £12.00
Ukraine £24.00



Please note: Delivery charges may be subject to change

Customer Reviews

No reviews yet Write a review

Payment & Security

Amazon American Express Apple Pay Google Pay Maestro Mastercard PayPal Shopify Pay Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Estimate shipping

You may also like

Recently viewed