Flexion Extruder Retrofit Kit


Price:
£148.99 (inc. VAT) £124.16 (ex. VAT)

 

3D printer extruder retrofit kit available for single extruder and dual extruder machines. The Flexion extruder will allow full-speed printing of flexible filaments and improved accuracy printing with PLA and ABS.
The precision machined components allow your printer to push on filament harder, achieve high pressure in the nozzle, and control of feed rates very closely. The self-cleaning drive will keep your long prints from failing due to a clogged drive. Works will with Ninjaflex, Filaflex, flexible PLA, TPU, TPE ultra-flexible filament down to 50 Shore A, and all the standard rigid filaments like ABS and PLA.
Single extruder is suitable for Wanhao i3 series
Dual extruder is suitable for FlashForge Creator Pro and Wanhao D4 series

*Does not include stepper motor.

 

The Flexion Extruder uses a high-stiffness lever to compress the filament. The compression is controlled with a cam and an adjust screw, rather than the traditional spring. This allows more tension and more precise control of the tension.

This kit requires you to disassemble your printer’s extruder and reinstall this upgrade. Detailed instructions on this process can be found on the Flexion support page.

Quick Setup / Operation:

  1. Before initially loading filament, loosen the set screw that contacts the cam surface of the dial. Set the dial to position 1. Tighten the set screw until the drive roller makes contact with the idler roller. Do not heavily torque the set screw, just tighten it using the shank of the Allen wrench.

  2. Rotate the dial to position 4. (Confirm that the dial rotates between 1 and 4 without binding. If it binds, loosen the set screw a small amount.)  At this point, you’re ready to load a filament and print. Use position 1 for very soft materials (Like Jellyfish or Ninjaflex), position 2 for moderately soft materials (like SemiFlex), position 3 for moderately hard materials (like ABS), and position 4 for very hard materials (like filled PLA). Set the correct dial location before loading filament.

  3. Load filament. With the dial at the correct setting and the extruder at the correct temperature, run your printer’s normal filament load cycle while you gently push the filament into the entrance liner.

  4. Prepare to print. Do your normal print setup routine (build platform prep, acetone clean, application of bonding agent, preheat, etc). Everyone has their own depending on their printer and the seriousness of their OCD. (See our printing tips section for some useful tricks and methods).

UK mainland DPD next business day delivery FREE for orders over £60.00 or £8.99 if below £60.00

UK DPD 2-3 day standard delivery £4.95

(For UK mainland customers only, if the order is placed before 2pm. Excludes weekends and the Channel Islands) 

 EUROPEAN DELIVERY COSTS

Austria £12.00
Belgium £8.00
Bosnia £24.00
Bulgaria £24.00
Croatia £18.00
Czech Republic £14.00
Denmark £12.00
Estonia £18.00
Finland £18.00
France £10.50
Germany £8.00
Greece £24.00
Hungary £18.00
Iceland £24.00
Italy £14.00
Latvia £24.00
Lithuania £24.00
Luxembourg £9.00
Netherlands £8.00
Norway £24.00
Poland £18.00
Portugal £18.00
Romania £24.00
Serbia £24.00
Slovakia £14.00
Slovenia £18.00
Spain £14.00
Sweden £18.00
Switzerland £12.00
Ukraine £24.00



Please note: Delivery charges may be subject to change

Customer Reviews

Based on 2 reviews Write a review

Payment & Security

Amazon American Express Apple Pay Google Pay Maestro Mastercard PayPal Shopify Pay Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Estimate shipping

You may also like

Recently viewed