PrimaSelect™ ASA+ Filament - 1.75mm - 750g
Most items delivered in 1-2 working days.
Contact us here or
call us on +44 1530 811 004
Most items delivered in 1-2 working days.
Contact us here or
call us on +44 1530 811 004
More options available
Beat harsh conditions with PrimaSelect ASA+ (Acrylonitrile Styrene Acrylate) filament. Especially developed to be used in demanding environments where you need UV and water resistance, thermal stability and improved chemical resistance. So if you are looking for a tougher replacement to ABS you have found it! ASA+ has a low-gloss matte finish which makes it perfect for technical prints where you really need to see all the details.
UV Resistant
ASA+ can withstand UV light 10x better than ABS and this makes ASA+ perfect for parts to be used outdoors where it will be exposed to the sun.
Toughness
Higher long-term heat resistance, and better chemical resistance. ASA+ is significantly more resistant to environmental stress then most other materials and that is why it has been used in the auto and marine industry for many years.
Printing with ASA+
If you can print ABS you can print ASA+. Prints with temperature around 230 - 255 °C with your heatbed set to about 80 - 100 °C. Perfect for applications like, automotive parts, outdoor furniture, technical parts, sensor housings or just on prints where you don't want a glossy surface.
Tip If you print at the higher end of the temperature scale you will have a stronger finished product.
Basic Data | |
Filament Typ | ASA+ |
Diameter | 1,75 mm |
Tolerance | 0,05 mm |
Weight | 0,75 kg |
Lenght | 274 m |
Color | Traffic red - RAL 3020 |
Printing Parameter | |
Recomended Printing Temp Min | 230 ºC |
Recomended Printing Temp Max | 255 ºC |
Recomended Printbed Temperature Min | 80 ºC |
Recomended Printbed Temperature Max | 100 ºC |
Recomended Printing Speed Min | 35 mm/s |
Recommended Printing Speed Max | 80 mm/s |
Recomended Fan Speed Min | 0 % |
Recomended Fan Speed Max | 25 % |
Recomended Retraction Min | 1,5 mm |
Recomended Retraction Max | 5 mm |
Recomended Flow Rate Min | 100 % |
Recomended Flow Rate Max | 102 % |
General | |
Specific gravity | 1,14 g/cm3 ISO 1183 |
Temperature | |
Vicat softening temp | 98 °C ISO 306 |
Heat deflection temp | 14 °C |
Tensile | |
Tensile strength | 48 MPa ISO 527 |
Tensile modulus | 2020 MPa ISO 527 |
Elongation | |
Elongation at yield | 3,6 % ISO 527 |
Elongation at break | 15 % ISO 527 |
Other | |
Impact Strength | 18 KJ/m2 ISO 179 |
SIGN UP TODAY SO YOU DON'T MISS OUT!